Wheel rim 2.50AX8 for material handling, wheelbarrows and light carts, industrial high load trailers
This rim can be fitted with tyre size(s):
✓ 4.00-8
Because the rim is welded airtight all around, it is also suitable for mounting tubeless tyres. However, it is not a hump rim where the edge of the tyre lies in a specially shaped groove to prevent the tyre from rolling off the rim when the tyre is flat.
Technical details
A - Type: Welded wheel rim for a pneumatic or solid rubber tyre
B - Rim width: 2.50 inch
C - Diameter rim: 8 inch
D - Flange disk: Flange disk with Bulge
D - Flange geometry (ETRTO): A
E - Offset: Neutral / No offset
F - Safety hump: No hump
G - Rim thickness: 1.25 mm
Rim connection: Wheel rim with integral hub
H - Hub lenght: 90 mm
J - Fitting length: 90 mm
L - Outer diameter hub: 60 mm
N - Bearing in hub: 6006-2RS mm
P - Axle hole diameter: 30 mm
Thickness of hub: 2,5 mm
AB - Valve hole: Rim with valve hole
Paint finish: Powder coating
Colour: Grey Aluminium
Vlukon Drawing ID: 4758
Old Vlukon ID: A23A4758
New Vlukon part number: R_2.50X8.00B1.25__L_V_GA4758
1.25 mm thick one piece welded RIM, diameter: 8 inch, width: 2.50 inch, bearing in hub: 6006-2RS
Product description
Customizations & Development
Customizations & Development
We are unique in development and productions for small manufacturing series
Our team consists of 45 persons who have an extensive knowlegde in customize rim productions.
Product information
- Article code A23A4758
- SKU R_2.50X8.00B1.25__L_V_GA4758
Specifications
Recently viewed
-
Wheel rim: 2.50AX8 |fitting length: 90mm | Alxe hole 30mm |Grey Aluminium
Rim size 2.50AX8 | 1.25 mm thick one piece welded RIM, diameter: 8 inch, width: 2.50 inch,...
-
-
Wheel rim: 3.50D-8 |fitting length: 72mm | Alxe hole 30mm |White
Rim size 3.50D-8 | 3.00 mm thick divided RIM | diameter: 8 inch | width: 3.50 inch | beari...
-
