2.00 mm thick one piece welded RIM, diameter: 5 inch, width: 3.00 inch, bearing in hub: 6204-2RS

Wheel rim 3.00AX5 for forestry machinery, agricultural machinery, lawn mowers, light solid industrial tires, tractors
This rim can be fitted with tyre size(s):
✓ 4.10/3.50-5
Because the rim is welded airtight all around, it is also suitable for mounting tubeless tyres. However, it is not a hump rim where the edge of the tyre lies in a specially shaped groove to prevent the tyre from rolling off the rim when the tyre is flat.

Technical details
A - Type: Welded wheel rim for a pneumatic or solid rubber tyre
B - Rim width: 3.00 inch
C - Diameter rim: 5 inch
D - Flange disk: Flange disk with Bulge
D - Flange geometry (ETRTO): A
E - Offset: Neutral / No offset
F - Safety hump: No hump
G - Rim thickness: 2.00 mm
Rim connection: Wheel rim with integral hub
H - Hub lenght: 100 mm
J - Fitting length: 100 mm
L - Outer diameter hub: 51 mm
N - Bearing in hub: 6204-2RS mm
P - Axle hole diameter: 20 mm
Thickness of hub: 2 mm
AB - Valve hole: Rim with valve hole
Paint finish: Powder coating
Colour: Grey Aluminium


Vlukon Drawing ID: 5111
Old Vlukon ID: A13A5111
New Vlukon part number: R_3.00X5.00B2.00__L_V_GA5111