2.50 mm thick one piece welded RIM, diameter: 8 inch, width: 3.00 inch, bearing in hub:

Wheel rim 3.00DX8 for agricultural machinery, horticulture transport carts
This rim can be fitted with tyre size(s):
✓ 5.00-8
Because the rim is welded airtight all around, it is also suitable for mounting tubeless tyres. However, it is not a hump rim where the edge of the tyre lies in a specially shaped groove to prevent the tyre from rolling off the rim when the tyre is flat.

Technical details
A - Type: Welded wheel rim for a pneumatic or solid rubber tyre
B - Rim width: 3.00 inch
C - Diameter rim: 8 inch
D - Flange disk: Flange disk with Bulge
D - Flange geometry (ETRTO): D
E - Offset: Neutral / No offset
F - Safety hump: No hump
G - Rim thickness: 2.50 mm
Rim connection: Wheel rim with integral hub
H - Hub lenght: 92 mm
J - Fitting length: 105 mm
L - Outer diameter hub: 40 mm
Thickness of hub: 2,5 mm
AB - Valve hole: Rim with valve hole
Paint finish: Powder coating
Colour: Blank


Vlukon Drawing ID: 3300
Old Vlukon ID: A24T3300BLA
New Vlukon part number: R_3.00X8.00B2.50__LGV___3300