2.50 mm thick one piece welded RIM, diameter: 10 inch, width: 3.50 inch, pcd: 110mm & center bore: 85mm l 4 bolt holes

Wheel rim 3.50BX10 ET: 23,5mm for agricultural machinery, horticulture transport carts
This rim can be fitted with tyre size(s):
✓ 4.50-10
Because the rim is welded airtight all around, it is also suitable for mounting tubeless tyres. However, it is not a hump rim where the edge of the tyre lies in a specially shaped groove to prevent the tyre from rolling off the rim when the tyre is flat.

Technical details
A - Type: Welded wheel rim for a pneumatic or solid rubber tyre
B - Rim width: 3.50 inch
C - Diameter rim: 10 inch
D - Flange disk: Flat flange disk
D - Flange geometry (ETRTO): B
E - Offset: positive offset +23,5 mm
F - Safety hump: No hump
G - Rim thickness: 2.50 mm
Rim connection: rim with center bore, pcd and bolt fitting
U - Center bore diameter: 85 mm
V - Pitch circle diameter (PCD): 110 mm
W - Number of bolt / stud holes: 4
X - Studhole Ø: 12 mm
AB - Valve hole: Rim with valve hole
Paint finish: Powder coating
Colour: White
Ral Colour : RAL 9010


Vlukon Drawing ID: 3954
Old Vlukon ID: G42W3954
New Vlukon part number: R_3.50X10.0F2.50+_M4V1WP3954