2.00 mm thick one piece welded RIM, diameter: 10 inch, width: 4.25 inch, pcd: 110mm & center bore: 85mm l 4 bolt holes

Wheel rim 4.25X10 ET: 19,5mm for forestry machinery, agricultural machinery, horticulture transport carts, material handling, industrial high load trailers
This rim can be fitted with tyre size(s):
✓ contact us
Because the rim is welded airtight all around, it is also suitable for mounting tubeless tyres. However, it is not a hump rim where the edge of the tyre lies in a specially shaped groove to prevent the tyre from rolling off the rim when the tyre is flat.

Technical details
A - Type: Welded wheel rim for a pneumatic or solid rubber tyre
B - Rim width: 4.25 inch
C - Diameter rim: 10 inch
D - Flange disk: Flat flange disk
D - Flange geometry (ETRTO):
E - Offset: positive offset +19,5 mm
F - Safety hump: No hump
G - Rim thickness: 2.00 mm
Rim connection: rim with center bore, pcd and bolt fitting
U - Center bore diameter: 85 mm
V - Pitch circle diameter (PCD): 110 mm
W - Number of bolt / stud holes: 4
X - Studhole Ø: 13 mm
AB - Valve hole: Rim with valve hole
Paint finish: Powder coating
Colour: White
Ral Colour : RAL 9001


Vlukon Drawing ID: 4858
Old Vlukon ID: G46CW4858
New Vlukon part number: R_4.25X10.0F2.00+_M4V1WC4858