2.00 mm thick one piece welded RIM, diameter: 6 inch, width: 4.50 inch, bearing in hub:

Wheel rim 4.50AX6 for agricultural machinery, lawn mowers, horticulture transport carts, hay tedders
This rim can be fitted with tyre size(s):
✓ 15x6.00-6
Because the rim is welded airtight all around, it is also suitable for mounting tubeless tyres. However, it is not a hump rim where the edge of the tyre lies in a specially shaped groove to prevent the tyre from rolling off the rim when the tyre is flat.

Technical details
A - Type: Welded wheel rim for a pneumatic or solid rubber tyre
B - Rim width: 4.50 inch
C - Diameter rim: 6 inch
D - Flange disk: Flange disk with Bulge
D - Flange geometry (ETRTO): A
E - Offset: Neutral / No offset
F - Safety hump: No hump
G - Rim thickness: 2.00 mm
Rim connection: Wheel rim with integral hub
H - Hub lenght: 80 mm
J - Fitting length: 80 mm
L - Outer diameter hub: 40 mm
N - Bearing in hub: keyway mm
P - Axle hole diameter: 25 mm
Thickness of hub: 7,5 mm
AB - Valve hole: Rim with valve hole
Paint finish: Powder coating
Colour: Grey Aluminium


Vlukon Drawing ID: 5772
Old Vlukon ID: A16A5772
New Vlukon part number: R_4.50X6.00B2.00__H_V_GA5772