4.00 mm thick one piece welded RIM, diameter: 14.5 inch, width: 6.75 inch, pcd: 140mm & center bore: 94mm l 5 Raised bolt holes

Wheel rim 6.75AX14.5 for forestry machinery, agricultural machinery, horticulture transport carts
This rim can be fitted with tyre size(s):
✓ 200/60-14,5
Because the rim is welded airtight all around, it is also suitable for mounting tubeless tyres. However, it is not a hump rim where the edge of the tyre lies in a specially shaped groove to prevent the tyre from rolling off the rim when the tyre is flat.

Technical details
A - Type: Welded wheel rim for a pneumatic or solid rubber tyre
B - Rim width: 6.75 inch
C - Diameter rim: 14.5 inch
D - Flange disk: Flat flange disk
D - Flange geometry (ETRTO): A
E - Offset:
F - Safety hump: No hump
G - Rim thickness: 4.00 mm
Rim connection: rim with center bore, pcd and bolt fitting
U - Center bore diameter: 94 mm
V - Pitch circle diameter (PCD): 140 mm
W - Number of bolt / stud holes: 5
X - Studhole Ø: 18,5 mm
Y - Studhole shape: Raised
AB - Valve hole: Valve hole protection cap
Paint finish: Powder coating
Colour: Telegrey
Ral Colour : RAL 7047


Vlukon Drawing ID: 3665
Old Vlukon ID: G95TG3665
New Vlukon part number: R_6.75X14.5F4.00__M5P4T43665